filling machine

The machine is fully stainless steel material which comply to food safety grade and rust-proof, equip reliable performance electric & mechanism compoment.High packing capacity and speed, high efficient and lower your labour cost. The machine is with a series function of automatic measuring, filling, bag forming and making, sealing and cutting process. The finished packaged pouch is reliable and elegant.

① Recommended filling range: 0.02 - 10kg.

② Commonly used in: honey, sesame paste, edible oil, lard, chocolate paste, syrup, engine oil, lubricating oil, silicone oil, glycerin, cream, various non setting glues, (AB glue), flowable plasters, large sauces, waterproof coatings, etc.

③ The diameter of the duckbill valve filling head is 20mm, which can be replaced with a fine filling head diameter of 12mm.

④ Wide range of applications: It can be filled as thin as water or as thick as sauce, even if the liquid contains non hard particles such as fruit pulp.

⑤ The maximum weight can be 10kg, with a comprehensive error of ≤ 2g.

⑥ High temperature resistance, acid and alkali resistance, solvent resistance, non corrosive brass liquid can be.

⑦ The gear pump made of brass is adopted, and the maximum pumping flow rate is 12L/min.

⑧ The flow rate of extracting ordinary honey is about 8 seconds per kilogram (500g), and the higher the viscosity, the slower the speed.

⑨ Honey, sesame paste, chocolate paste, etc. can only be used with L15.

⑩ L15 is recommended for oils and viscous liquids.

⑪ Paint, wax, gypsum water, etc. cannot be used with this machine, as it will block the pump after solidification.

The oil filling machine is suitable for filling 4kg-25kg automotive products: lubricating oil, antifreeze, car urea and other liquids. A series of operations such as counting into bottles, counting weight filling, and conveying out bottles are completed automatically. It is especially suitable for quantitative filling of lubricating oil, motor oil and edible oil. It is an ideal filling machine for food, medicine, cosmetics and fine chemical industries.

The automatic 16-head lubricating oil filling production line is the latest achievement of our company's researchers. It is based on the original model, according to actual production requirements, adopts the opinions of most manufacturers, retains the measurement methods of the core equipment system, and draws on foreign filling technology control procedures, which is incomparable in the same industry. The castor oil filling line is reasonably designed and easy to operate. The cylinder piston and cylinder block are made of pte and 304 stainless steel. The filling speed of the winter head of the filling machine can be directly set through the touch screen.

1. The bottle sauce filling machine uses compressed air as power and an automatic filling system is composed of precision pneumatic components.

2. The bottle unscrambler of the sauce nottle filling machine uses mechanical transmission technology, which can be adapted to a variety of bottle types through simple adjustments

Edible Oil Filling Machine
The edible oil filling machine design is reasonable, small, easy to operate, cylinder piston and cylinder body are made of stainless steel material, using thin cylinder, control the filling valve open and close, valve core is made of high quality stainless steel, can be used for a variety of corrosive liquid filling,
Edible oil filling machine is designed with anti-drip, anti-wire-drawing, adjustable lifting filling device, cylinder shaft and filling liquid isolation, greatly extending the service life of the cylinder.
Edible Oil Filling Machine Filling volume and filling speed can be arbitrarily adjusted, high filling accuracy.Fillable liquids (edible oil, lubricating oil, detergent, oil, etc.)

1. The bottle sauce filling machine uses compressed air as power and an automatic filling system is composed of precision pneumatic components.

2. The bottle unscrambler of the sauce nottle filling machine uses mechanical transmission technology, which can be adapted to a variety of bottle types through simple adjustments

This filling machines is a filling machine for filling high-concentration fluids. Selected 316L stainless steel material, the filling head of the filling machine is customized according to the material to ensure smooth feeding. The filling volume can be adjusted by controlling the stroke of the cylinder. The international brand Airtac pneumatic cylinder is more powerful and more durable, filling machine suitable for various paste materials of various specifications.

This machine is a new generation of automatic multi-purpose filling system developed on the basis of DTFM edible oil filling machine. It has greatly improved the matching of filling speed and filling accuracy, and solved the influence of filling speed on filling accuracy. With the same output model, the equipment inspection point is reduced by 80% compared with the traditional machine, making the automated filling system easier to use and maintain. This model can be used with Dongtai's tracking capping machine to break the traditional linear filling machine's catch-on filling, and truly realize the continuous bottle production in the filling line.