Common problems and maintenance methods of automatic filling machines
Most of the types of oil that are common in our daily lives are filled by oil filling machines. Our demand for oil is increasing dramatically, and traditional manual filling has been unable to meet our needs. For enterprises, if there is a problem with the automatic filling machine, it will have a great impact on the production schedule. Today we will talk about common problems and maintenance methods of automatic filling machines in order to respond to occasional needs.
First, after the controller starts, the grease nipple comes out but the controller does not measure (less running)
Response: Inspect whether the signal cable is damaged or disconnected. If it is disconnected, connect it according to the original color, or change it. Inspect whether the platinum resistance is damaged. If it is damaged, change it. , It means that the temperature signal line is short-circuited or disconnected; if the temperature is displayed as -20 ℃, it means that the temperature signal line is connected incorrectly, please reconnect. If the temperature display does not fluctuate, it indicates that the platinum resistance has a performance, please change it.
Second, the edible oil filling nozzle does not go down
Response: Examine whether the air compressor's air outlet switch can be turned on and whether the air pressure is normal.
Third, close the grasp of ideas
Response: Examine whether the air compressor's air outlet switch can be turned on and whether the air pressure is normal.
Fourth, the oil does not fluctuate during filling.
Response: Clean the filter.