How to reduce the dripping phenomenon of the automatic edible oil filling machine?
After the edible oil filling machine production line is widely used, many companies will encounter the situation that the edible oil filling machine is still dripping after the edible oil filling machine is closed, so what should I do if the edible oil filling machine leaks? Next, I will give you a specific introduction:
1. The cause of the oil leakage may be that the O-ring in the edible oil filling machine is corroded or severely worn. This requires us to repair the O-ring.
2. The cause may also be that the ball valve in the edible oil filling head is damaged or not closed tightly. At this time, we need to check the ball valve in the filling head. If the ball valve in the filling head is damaged, the ball valve needs to be replaced.
3. In the use stage, if the lubricating oil filling machine is turned off and the dripping occurs, first check whether the filling nozzle orifice of the filling head of the edible oil filling machine is damaged. You can remove the filling nozzle to repair the orifice. The diameter cannot be greater than 7.5mm. After repairing the hole diameter, smooth the hole on the water sandpaper. Another possibility is that the ball valve in the filling head is damaged. The ball valve needs to be replaced to improve the oil leakage.
4. If the syringe is assembled and the inner and outer tubes are not clean and jammed, the syringe needs to be removed for cleaning or replaced with a new one.
The production of the automatic edible oil filling machine improves the production efficiency for the production of edible oil. If the edible oil filling machine is in use, the phenomenon of dripping will occur. Don't worry, find the cause of the occurrence, and the solution will follow. Therefore, in order to give full play to the advantages of the edible oil production line, we must pay attention to daily maintenance.
